High Beam Bulb Type: HB3. Low Beam Bulb Type: HB3.
Made of materials that meet or exceed OEM requirements. 1 Pair LH (Driver Side) + RH (Passenger Side) Headlights. Before you begin to adjust the light, make sure to check the alignment of your lights first.Park the vehicle about 10 to. 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than. 3.5 feet above the ground.
Firstly, locate the adjustment screws on your vehicle. The headlights should be adjusted one at a time. Put a rag or towel over a chair in. Front of the light you want to block.
Covering the light assembly directly can damage the plastic lens. The screw on the top of the light housing should be turned clockwise to raise the lights and. Counterclockwise will lower the light.
The headlight should be adjusted until the top of the most intense part of the light. Beam shines directly on or just below the center of the tape line on the wall.The screw on the side of the light housing should be turned to get the right/left adjustment. Adjust the lens so that the most intense part of the beam is to the right of the vertical line. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Headlight Assemblies". The seller is "ledkingdom-us" and is located in this country: US.
This item can be shipped to United States.